Giordamineral - Sodium Mineraliser
Giordamineral is a water-based sodium silicate mineralizer for natural stone, concrete, and terracotta. This product has strong water-repellent properties. It can also be used during concrete grinding to enhance hardness and facilitate a mirror finish on concrete. It is vapor-permeable and has high penetration power.
Packaging: 5L
-
Fast delivery (24/48 hours) and free delivery for orders over €350 (mainland France) to your home or to a relay point.
-
Permanent discounts on public rates for professionals
-
Do you have a question? An information ? An advice ? Contact our experts at +33 4 92 38 95 67
Giordamineral is a water-based sodium silicate mineraliser designed for natural stone, concrete, and terracotta. This product has strong water-repellent properties. It can also be used during concrete polishing to improve surface hardness and enhance the mirror finish. It is vapour-permeable and offers deep penetration.
Key features:
- Suitable for all mineral materials
- High performance
- Easy to use
- Water-based
- Water-repellent and strengthening
- UV-resistant
- Colourless
Directions for use:
Ready-to-use product. Shake well before use.
Surfaces must be clean, free of dirt and silicone, and dry or slightly damp (moisture below 40%).
1. Apply to saturation using a sprayer or squeegee. Apply 1 to 2 coats to refusal, with a 30-minute interval.
2. Rinse tools with water immediately after use.
3. Ideal application temperature: 20-25°C.
Caution: do not apply in freezing temperatures (below 5°C), in windy conditions, or on hot or sun-exposed surfaces. Corrosive product — wearing protective goggles and gloves is recommended.
Coverage:
Average consumption per coat:
- On low-porosity surfaces: 1L for 8–10 m²
- On high-porosity surfaces: 1L for 6–8 m²
Packaging: 5L
Data sheet
- Usage
- Water Repellent Treatment
- Material
- Concrete
Natural Stone
Terracotta
Terrazzo - Environment
- Indoor
Outdoor - Base Type
- Water-based
- Quantity
- 5 L
- Label
- Giorda System Method