Giordawax is a solvent-based finishing wax made from natural ingredients, designed to be polished. It enhances the beauty and charm of indoor terracotta and natural stone. Giordawax has excellent adhesion with all previously applied treatment products.

Key features:

- High penetration and saturation capacity on absorbent surfaces thanks to its fluidity, even at low temperatures
- Fast drying
- Does not yellow over time, leaves a silky finish on the surface, and can be applied to light or white materials (such as marble)
- Forms a barrier against dirt and enhances the material's beauty and appeal, with excellent resistance to foot traffic and grime
- Can be pigmented (3-15%) for custom decorative effects
- Easy to restore and repair over time
- No unpleasant odor during indoor use

Directions for use:

Usually, one or two coats of Giordawax are sufficient depending on the material’s absorption and roughness. The product must be applied only on surfaces previously treated with water repellents.
1. Apply Giordawax in small quantities with a brush over a few square meters, then spread the product by scrubbing the surface with a single-disc machine fitted with soft nylon brushes. Work the wax into the pores until saturation, leaving a light film on the surface.
2. Once dry, polish the surface using a soft pad or soft brush.
3. If needed, apply a second coat on a dry, non-sticky surface using the same method.
Drying time: typically 4 to 8 hours.

Caution: avoid applying Giordawax to damp materials or in environments with rising moisture risk. Do not use on surfaces that may come into contact with high heat (above 70°C), such as kitchen countertops.

Coverage:

Depending on material absorption:
- For highly absorbent and rough surfaces: 1L covers 12-20 m²
- For medium absorbent materials: 1L covers 20-30 m²

Packaging: 5 L