Giordapul - Degreaser
Giordapul is a concentrated water-based detergent solution designed for both deep and routine cleaning of all hard surfaces (terracotta, stone, concrete, ceramic materials, metal, glass, and synthetic surfaces).
Compatible with use in floor scrubber machines.
-
Fast delivery (24/48 hours) and free delivery for orders over €350 (mainland France) to your home or to a relay point.
-
Permanent discounts on public rates for professionals
-
Do you have a question? An information ? An advice ? Contact our experts at +33 4 92 38 95 67
Giordapul is a concentrated water-based detergent solution designed for both deep and routine cleaning of all hard surfaces (terracotta, stone, concrete, ceramic materials, metal, glass, and synthetic surfaces).
Features:
- Ideal for regular and intensive cleaning of all hard, absorbent and non-absorbent surfaces (terracotta, clinker, stone, marble, cement agglomerates, ceramic materials, metal, wood, PVC, and synthetic surfaces in general).
- Can be used in low concentrations for routine cleaning of all surfaces. When used in higher concentrations, it performs intensive degreasing without damaging the materials.
- When used undiluted, it can remove old, darkened, and deteriorated surface wax layers from already treated surfaces without affecting the underlying treatment.
- Suitable for post-installation cleaning of delicate materials (e.g., slate, marble, terrazzo).
- Low-foam detergent compatible with floor scrubber machines.
- Leaves no streaks or halos and releases a pleasant scent in the room.
Instructions for use:
The concentration depends on the type of dirt to be removed.
Dilution guidelines:
- Pure or 1:1 dilution (1 part Giordapul to 1 part water): for post-installation cleaning of delicate materials (e.g., marble and sensitive stones) and for deep cleaning to remove darkened dirt and maintenance wax residues, without stripping the base treatment.
- 250 ml of Giordapul per 1 L of water: for heavy-duty degreasing of surfaces heavily soiled with motor oil, vegetable or animal fats, greasy stains, marker residue, or for deep cleaning of very dirty wood or parquet floors.
Application:
1. Apply Giordapul to the surface.
2. Allow it to sit for a few minutes, then scrub using a green pad.
3. Remove the residue with a microfiber cloth and rinse with clean water. Then apply an anti-dirt and wear-resistant finishing layer.
4. 10–40 ml of Giordapul per 1 L of water: for routine surface cleaning.
5. Apply like a regular detergent using a microfiber cloth. In this dilution, it can also be used with floor scrubber machines.
Packaging: 5 L
Data sheet
- Usage
- Cleaning
Scraping - Material
- Granite
Marble
Natural Stone
Parquet
Terrazzo
Terrazzo - pH
- 8
- Environment
- Indoor
Outdoor - Base Type
- Water-based
- Quantity
- 5 L
- Label
- Giorda System Method