Get your free best quote

Fill out the form below with the required information.

Giordex - Solvent-based
Giordex - Solvent-based

Reference : PNG59

Dear Visitor,
If you want to get the best price for the product above, please fill in the empty fields below.

Contact Information

Other Details

* denotes required fields
Giordex - Solvent-based

Giordex - Solvent-based

€52.10
Tax excluded

Giordex is a solvent-based, water-repellent, and oil-repellent treatment product for raw or honed stone and terracotta. This product can be applied on both indoor and outdoor floors.

It is a microporous product based on a highly concentrated fluorinated resin in dry extract, which makes it very effective in terms of protection and longevity outdoors.

Finish: Non-film-forming, very slightly toning.

Coverage: 1L for 10 to 15m².

Product with the Giorda System Method label.


Documentation téléchargeable :

Technical File (161.88k)
Packaging
  • Fast delivery (24/48h) and free of charge from 250€ (Europe) at home or in relay points. Fast delivery (24/48h) and free of charge from 250€ (Europe) at home or in relay points.
  • Permanent discounts on public rates for professionals Permanent discounts on public rates for professionals
  • Do you have a question? An information ? An advice ? Contact our experts at 04 92 38 95 67 Do you have a question? An information ? An advice ? Contact our experts at 04 92 38 95 67

The Giordex is a solvent-based, water-repellent, and oil-repellent treatment product for raw or honed stone and terracotta. This product can be applied on both indoor and outdoor floors.

It is a microporous product based on highly concentrated dry extract resin, making it highly effective in terms of protection and longevity outdoors.

Instructions for use:

- The product is used pure, on a dry, clean, and untreated material.
- It is applied with a brush, a soft cloth, or a wax-spreading fleece, evenly wetting the surface to be treated until saturation.
- Pay special attention to joints and cracks.
- After 5-10 minutes, completely remove any unabsorbed product by rubbing the surface with a soft, dry cloth or absorbent paper.
- Giordex dries in 6 to 8 hours. Protect or avoid wetting the surfaces just treated by rain for 24 hours after application.

Application type:

- 1 coat on low-absorption stony materials.
- 2 coats on absorbent stone surfaces and outdoors. The application of any second coat must be done as soon as the first is dry on the surface.

Appearance: Non-film forming, very slightly toning.

Coverage: 1L for 10 to 15m².

Product with the Giorda System Method label.

PNG54

Specific References

ean13
3701658001995

You might also like

New Account Register
Already have an account?
Log in instead Or Reset password