Epoxy 400 is a thixotropic epoxy adhesive in cartridge form (2x200 mL). It is designed for the permanent bonding of marble, natural stone, engineered stone, and porcelain stoneware, either to themselves or to other substrates (cement, terracotta, ceramic, etc.). It is intended for indoor flooring applications.

It is applied using the VBM 200X Bimixer Gun.

Key features:

- Excellent adhesion between different materials
- Very fast curing
- Suitable for indoor applications only (not recommended for water-immersed or high-humidity environments)
- Minimal shrinkage
- Curing speed increases with temperature
- Does not adhere to silicone or polyethylene

Instructions for use:

1. Surfaces to be bonded must be porous, dry, and free from dust or foreign substances (oil, grease, etc.).
2. Apply directly, with a spatula, or by coating.
3. Use with the VBM 200X Bimixer Gun.
4. Do not apply at temperatures below 10°C.
5. Curing time: 180 to 300 minutes in a thin layer (depending on ambient conditions).
6. Full cure is achieved after 24 hours.

Warning: the first 40-50 mm of product coming out of the static mixer may not be properly mixed. To avoid curing issues, discard the initial output.

Coverage: 250 to 700 g/m²

Packaging: 2 x 200 mL