Kit 3 Rubis Ø432 - Soft Finish Sanding
The Kit 3 Soft Finish Sanding allows for a soft finish in the renovation of marble, natural stone, granite, terrazzo, granito, and cement tiles.
Composition of the kit:
- 1 Rubis Diamond Pad Grit 50 Ø432
- 1 Rubis Diamond Pad Grit 200 Ø432
- 1 Rubis Diamond Pad Grit 600 Ø432
Made in France
-
Fast delivery (24/48 hours) and free delivery for orders over €350 (mainland France) to your home or to a relay point.
-
Permanent discounts on public rates for professionals
-
Do you have a question? An information ? An advice ? Contact our experts at +33 4 92 38 95 67
Sanding - 150m² depending on the surface
Composition of the kit: Rubis Range
- 1 Diamond Pad Grit 50
- 1 Diamond Pad Grit 200
- 1 Diamond Pad Grit 600
Materials: Marble – Natural Stone – Granite – Terrazzo – Granito – Cement Tile
Surface: Floor
Equipment: Single Disc Machine – Wet Vacuum
Work: Wet
Instructions:
The Kit 3 allows for a soft finish in renovation.
1. Start sanding with the Grit 50 Pad, which is very aggressive. Make 4 to 5 passes, crossing them using the single disc machine. This removes deep scratches and heavy soiling both indoors and outdoors. Additionally, it removes excess mastic used for joint repair and filling small holes.
2. The principle of sanding is to remove the scratches from the previous pad. Therefore, after the Grit 50 pad, use the Grit 200 pad to erase the scratches from the Grit 50 pad.
3. To achieve a matte satin finish, use the Grit 600 pad, which provides a soft finish that varies depending on the stone's structure.
4. Daily maintenance is done with Giordasol Stone. Giordasol is a neutral pH product that does not clog floors and leaves a natural shine. For use, dilute one capful of the product in a bucket containing 3L of water and clean.
All MPMS products are made in France.
Data sheet
- Usage
- Finition stage
- Material
- Cement
Granite
Marble
Natural Stone
Terrazzo
Terrazzo - Diameter
- 432
- Grit
- 50
200
600 - Machine
- Single-Disc Machine
- Composition
- Resin
- Method
- Wet