Sanding - 200m² and High Gloss Polish

Kit composition: Rubis Range

- 1 Ø432 Diamond Pad grit 600
- 1 Ø432 Natural Fiber Disc
- 1 Ø432 White Disc
- 1 Giorda Pot-T 3kg

Materials: Marble - Limestone - Granite

Machines: Single Disc Machine - Wet Vacuum Cleaner

Work: Wet

Instructions:

The Kit 1+2 allows for stripping, micro-sanding, and crystallization with powder (achieving a high gloss polish).

1. Begin work with the Diamond Pad Grit 600 using the single disc machine. This will deeply strip and remove micro-scratches, preparing the surface well for achieving a high gloss polish. Cross passes are important, making between 4 and 5 passes.

2. Start the process of achieving the High Gloss Polish, always accompanied by Giorda Pot-T powder.

3. Form a small mound of powder (500g) and moisten it with water until it forms a yogurt-like consistency.

4. Place the natural fiber disc on the machine and polish this mixture for 15 minutes (approximately 5 passes) per 15m².

5. Perform an initial rinsing with water using the natural fiber disc, ensuring to vacuum the area at the end of rinsing.

6. Repeat the powder application every 15m² until the entire surface of the site is covered.

PS: Applying the powder will finish the polishing process by forming a chemical reaction with the limestone in the marble, resulting in a very high, natural gloss without any orange peel effect. It is advisable not to walk on the powder.

7. Once the powder and initial rinsing are completed across the entire surface, perform 2 to 3 rinses with the white disc (or with the natural fiber disc rinsed thoroughly with water) to achieve an optimal gloss.

8. Daily maintenance is done using Giordasol Pierre. Giordasol Pierre is a pH-neutral product that does not leave residues on floors, preserving their natural shine. For use, dilute a capful of the product in a bucket containing 3L of water and clean.

All MPMS products are manufactured in France.